Coating thickness gauge PCE-CT 80-FN2, up to 2000 µm + ISO certificate
Item number: 307507W
- Coating thickness gauges are precise instruments for measuring the thickness of coatings, paints or surface layers on different materials and surfaces
- The use of coating thickness gauges enables accurate assessment of coating quality, supports compliance with norms and standards, contributes to quality control in production and enables optimised material use and avoidance of material waste
- Coating thickness gauge for measurements on iron, steel and non-ferrous metals
- Measurements not influenced by vibrations
- Practical V-groove on the measuring heads
- Warning message for measurements outside the maximum measuring range
- Measuring device for non-destructive measurement of non-magnetic coatings (paint, plastic, chrome, ...) on iron/steel and non-electrically conductive coatings (paint, plastic, enamel, ...) on non-ferrous metals (e.g. aluminium, copper)
- The externally connected probe makes it easy to reach measuring points that are difficult to access
- Automatic mode with material detection
- Data transfer via USB possible
- Statistical functions: number of measured values, mean value, minimum, maximum, standard deviation
- Battery operation
- Minimum measuring surface Ø17 mm
- Minimum base material thickness on magnetic materials 0.2 mm, on non-magnetic materials 0.05 mm
- Including calibration plates (1x ferrous, 1x non-ferrous)
- Measuring range up to 2000 µm
- ISO calibration certificate included
We work hard to give you good advice!
+44 1952 811 991
Mon-Thu: 8:30am – 5:00pm | Fri: 8:30am – 4:00pm
Your advantages
- Free shipping
- 30-day right of return
- Secure payment
- Maintenance and spare parts service
Product information
| Technical data | Details |
|---|---|
| Model | PCE-CT 80-FN2-ICA |
| Design | Calibration included |
| Brand | PCE Instruments |
| External dimensions W x D x H [mm] | 78 x 145 x 36 |
| Weight [kg] | 0,849 |
| Interface | Micro-USB |
| Operating temperature range max. [°C] | 50 |
| Operating conditions r.h. min. [%] | 20 |
| Operating conditions r.h. max. [%] | 90 |
| Protection category ip | IP 30 |
| Alarm | optical |
| Alarm modes | Overrun |
| Display size [″] | 1.97 |
| Measuring functions | MIN MAX Average value |
| Included in delivery | 1 x material thickness gauge PCE-CT 80-FN2 3 x AAA batteries 1 x user manual 1 x carrying case 1 x set of standard foils 1 x calibration plates (Fe and NFe) 1 x ISO calibration certificate |
| Languages | English (US) German Chinese Russian |
| Automatic switch-off [min] | 3 |
| Automatic switch-off can be deactivated | yes |
| Battery type | 3 x 1.5 V AAA batteries |
| Coating thickness measuring range max. [µm] | 2000 |
| Number of calibration points | 4 |
| Layer thickness accuracy [% v. Mw.] | 2 |
| Layer thickness resolution [µm] | 0.1 |
| Displayart | LCD with lighting |
- Coating thickness gauges are precise instruments for measuring the thickness of coatings, paints or surface layers on different materials and surfaces
- The use of coating thickness gauges enables accurate assessment of coating quality, supports compliance with norms and standards, contributes to quality control in production and enables optimised material use and avoidance of material waste
- Coating thickness gauge for measurements on iron, steel and non-ferrous metals
- Measurements not influenced by vibrations
- Practical V-groove on the measuring heads
- Warning message for measurements outside the maximum measuring range
- Measuring device for non-destructive measurement of non-magnetic coatings (paint, plastic, chrome, ...) on iron/steel and non-electrically conductive coatings (paint, plastic, enamel, ...) on non-ferrous metals (e.g. aluminium, copper)
- The externally connected probe makes it easy to reach measuring points that are difficult to access
- Automatic mode with material detection
- Data transfer via USB possible
- Statistical functions: number of measured values, mean value, minimum, maximum, standard deviation
- Battery operation
- Minimum measuring surface Ø17 mm
- Minimum base material thickness on magnetic materials 0.2 mm, on non-magnetic materials 0.05 mm
- Including calibration plates (1x ferrous, 1x non-ferrous)
- Measuring range up to 2000 µm
- ISO calibration certificate included
Free shipping
to Mainland U.K.
Personal consultation
by our hazmat experts
14-day right of return
in accordance with the terms and conditions
Maintenance and spare parts service
directly from the manufacturer
