Dehmer Strasse 58-66
32549 Bad Oeynhausen
br>Tel.: +49 5731753-0

Occupational Safety During the Winter Season

Employers have a duty of care to ensure the health and safety of their employees, and during the winter months they must minimise the risks from snow and ice. As with any health and safety assessment and policy, your business needs to plan for adverse weather conditions. Potential hazards need to be identified, and measures need to be taken to reduce those risks.

Slips, trips and falls increase during Winter for a number of reasons: there is less daylight, leaves fall onto paths and become wet and slippery and cold weather spells cause ice and snow to build up on paths.

There are, however, effective actions that you can take to reduce the risk of a slip or trip in your workplace.

Employer Duties

As winter sets in, employers need to be aware that workers who are exposed to cold, wet or icy conditions may be at risk of sustaining injuries or becoming ill. But with the right preparation and precautions in place risks can be minimised.

Slips, trips and falls happen year-round, but during colder months, ice and snow create a more hazardous environment that increases the risk of injury at work. Employers have a duty to ensure that the surface of every traffic route on their premises, whether that be roads or pavements, is suitable for the purpose for which it is used and does not expose their employees to the risk of slipping.

Employers need to ensure that an active effort is made to prevent ice build-up on traffic routes and ensure that car parks and other work areas are also cleared. In addition to ice and snow, other obstacles that could compromise the safety of workers include wet leaves, fallen branches and excessive amounts of rainwater.

Our top tips to help avoid slips, trips and falls at work:

  • Identify the areas used by pedestrians most likely to be affected by ice - building entrances, car parks, walkways, break areas - and put a procedure in place to prevent an icy surface forming e.g. gritting.

  • Ensure all staff members are trained on your winter safety policy

  • Keep all walkways, stairways and other work areas clear from water and ice and remove hazards immediately

  • Ensure all walkways and passageways are clearly marked and well lit

  • Clearly mark hazardous areas. Use temporary signs, cones, barricades or chain stands to warn passing workers.

  • Monitor the temperature and take action whenever freezing temperatures are forecast

In addition to the employer having a duty of care to provide a safe work environment for their employees, individuals are also considered to be responsible for their own safety and to take reasonable care when travelling into areas where they should reasonably suspect icy or slippery surfaces to be present. This includes wearing appropriate footwear, taking extra care when walking and avoiding carrying heavy loads that may compromise balance.

Ice and Snow

You must identify the hazards associated with snow and ice as part of your site risk assessment. Then you need to take steps to ensure they are minimised.

The most common method used to melt existing snow and ice and prevent new ice from forming on surfaces is gritting as it is relatively cheap, quick and easy to carry out.

Gritting should be carried out when frost, ice or snow is forecast or when walkways are likely to be damp or wet and the floor temperatures are at, or below freezing. The best times are early in the evening before the frost settles and/or early in the morning before employees arrive.

In order to clear ice from pathways, car parks and entry points easily and effectively, spreading materials should be stored close by in designated containers. Materials such as salt, granules or sand often become unusable if stored incorrectly, so proper storage is particularly important.


Our Top Product for Winter
Grit Containers: Install grit containers around your premises to ensure fast and easy placement of scattering materials on icy surfaces such as car parks and walkways!

Other Winter Risks

Fallen leaves

Fallen leaves that are wet or have started to decay can create risks of people falling or slipping in two ways:

  • The surface is slippery and can be as hazardous as ice.

  • They can hide any danger that may be on the path, such as an uneven surface or an obstruction.

It is recommended that a procedure is put in place to remove leaves from car parks and walkways at regular intervals.

Rain water

Excessive rain can play havoc with surfaces. The following should be considered when dealing with rain water:

  • To help reduce the dangers of slips when people walk in water and then tread it into the building, consider installing canopies over the entrances to your buildings.

  • If a canopy is not a possibility, consider installing large, absorbent mats or even changing the entrance flooring to one which is non-slip.

  • Discourage people from taking shortcuts over grass or dirt, which are likely to become slippery when wet.

  • Consider converting existing shortcuts into proper paths and ensure the material used will be slip resistant when wet.

Vehicle speed

It’s important to consider the precautions you can take in external areas in advance of deteriorating weather. We recommend erecting signs indicating a reduction in speed in car parks before autumn and winter begin. You could also introduce speed bumps to parking areas in order to force vehicles to slow down to safer speeds.

Anti Slip Mats for Added Protection

Many slip accidents happen at building entrances as people entering the building walk in rainwater, ice or snow. Our range of anti slip mats offer an ideal solution for year-round slip resistance in entrance halls and inside all external doors.

Winter Workplace Safety Checklist

Are your employees safe in any weather?

Our checklist for Winter Workplace Safety will help you to ensure you have the right precautions in place and the necessary products on site ready for you to tackle the cold season.

We are happy to advise you!

Whether on the phone, via e-mail or in person at your premises - we are happy to help and advise you. Get in touch with us.

Free expert advice 01952 811 991

Related Content

Product world

Hazardous materials intralogistics: efficient and safe!

DENIOS safety products reduce transport risks to a minimum and ensure that your hazardous substances are transported safely and efficiently. Here you will find an overview of our product range for more work safety when transporting hazardous substances.

Read more

Risk assessment involving hazardous substances

Anyone who handles, uses or "only" stores hazardous substances cannot avoid it: the risk assessment. For 25 years it has been the central element in occupational health and safety. In our FAQs we have put together the answers to the most frequently asked questions on the subject of "Risk assessment for hazardous substances".

Read more

Introduction to explosion protection

Explosion protection can quickly become an issue in all industries: Many hazardous substances that are handled on a daily basis harbour a corresponding hazard potential. Here you can find out what you need to know to get started with explosion protection.

Read more
Case Study

Air-conditioning work table for BECOM GmbH from Austria

BECOM GmbH from Austria manufactures electromechanical assemblies. When cleaning small parts, inflammatory acetone vapors are produced which should protect the employees. A DENIOS cleaning table with pollutant detection ensured more safety.

Read more
Case Study

Mixing station in the middle of the APO GmbH production halls

The APO GmbH from Germany deals with the coating of industrial mass small parts. To protect employees against harmful coatings, DENIOS constructed a transfer and mixing station, which at the same time ensured fire-protected storage.

Read more
Case Study

Optimal protection for employees at Covestro AG

In the handling of chemical raw materials in the powdery or dusty state, increased safety requirements apply to the design of workplaces to protect employees. Covestro AG chose DENIOS to implement the project.

Read more

The specialist information on this page has been compiled carefully and to the best of our knowledge and belief. Nevertheless, DENIOS AG cannot assume any warranty or liability of any kind, whether in contract, tort or otherwise, for the topicality, completeness and correctness either towards the reader or towards third parties. The use of the information and content for your own or third party purposes is therefore at your own risk. In any case, please observe the locally and currently applicable legislation.

Log in
Your basketAdded to basket
Go to basket
*Required field

If you want to request more than one product, please use the shopping list function. Please also note our Data protection declaration .

This website is protected by reCAPTCHA and Google's privacy policy and terms of use apply.