It is commonly said that one drop of oil can contaminate up to 1,000 liters of water. Contamination of waters threatens a fine or even imprisonment. But what should be done to prevent this from happening?
Every day companies deal with hazardous substances and they are often unsure about what needs to be stored and how it should be stored, so that employees, their facilities and the environment, are safely protected. The following guide answers some important FAQs.
How should a spill tray for storing flammable liquids be designed?
Spill trays must be impermeable to the stored liquids and must consist of non-combustible building materials.
For which substances are steel, plastic or stainless steel spill trays suitable?
The material from which a spill tray is made from, must be suitable for the stored liquids. For the storage of water-polluting and flammable substances such as oils and lacquers, steel spill trays should be used. Available in a galvanized or lacquered version.
For storage of aggressive chemicals such as acids and alkali,stainless steel or plastic spill trays should be used.
What else should be considered when choosing a spill tray or pallet?
Depending on the intended use, spill trays and pallets must be able to cope with different requirements. Spill pallets with integrated forklift pockets are ideal for safe internal transport with a forklift truck.
In addition, it is important to consider the collection volume of the tray or pallet, and the spill tray should always be thoroughly tested and certified and compliant with all current regulations.
What should be considered when storing flammable liquids?
The storage space must be suitable; there must be permanent ventilation, explosion protection and structural fire protection.
What is the maximum height of a spill tray when storing flammable liquids?
A spill tray height of 500 mm must not be exceeded, because then sufficient ventilation is no longer guaranteed. If a higher tray height is required, you can use technical ventilation.
How do I determine the correct collection volume?
According to The Control of Pollution (Oil Storage) (England) Regulations 2001, any container with a storage capacity of over 200 litres, in any industrial, commercial or institutional site, should have a secondary containment system in place capable of holding 110% of the contents of the chemical stored or 25% of the total volume, whichever is greater.
What operator duties apply to spill trays and pallets?
What to do if... (copy 1)
... a hazardous substance has collected in the tray?
The spill tray should be subjected to an apparent seal test at least once a week. Remove the hazardous substance properly with suitable absorbents and dispose of safely.
... something goes wrong?
Soak up the leak with an absorbent that is suitable for the hazardous substance being stored. Also, make sure the shape of the absorbent matches the leak. Absorbents are available in the three versions: oil, universal and chemical. Find the right absorbent for your needs here.
... you notice signs of corrosion?
Get an overview of the test certificates and the manufacturer's warranty. If you notice signs of corrosion, the spill pallet should be disposed of in accordance with the law. To perform a general leak test, you can of course just pour water into the tub to check the seal.
... I have to transport my spill pallet?
Many spill pallet models have fork pockets so they can easily and safely be transported by forklift from A to B. Individual models are also available on wheels. If a floor spill tray has to be transported, this can be done on a wooden pallet. In any case, care must be taken that the spill tray is not too full that there is a risk of leakage during transport. If you are required to transport the spill pallets outside the workplace and across public roads, legislation for transporting dangerous goods must be taken into account.
Changes and errors excepted. All information provided has been carefully researched. Nevertheless, DENIOS can not guarantee the topicality, correctness, completeness or quality of the information provided.
|Need more information or advice? Call 01952 700 567 to speak to a DENIOS expert.|