Extraction table for welding work, worksurface 1000 x 900 mm
Item number: 173298W
- Direct extraction of harmful substances from the workplace. The workstations have an integrated air supply and extraction device. With the air supply device, the air flow is directed diagonally from the lower and upper edges of the workstation into the work area, so that the user is constantly in a shielded air zone. The pollutants cannot break through this wedge of clean air and therefore remain in the rear part of the workstation
- Due to the aerodynamically shaped baffles and the semi-open design, the air containing pollutants is optimally captured and extracted, even at low air volume flows, by means of the Coanda effect achieved.
- Workstations can be connected to a central extraction unit or can be set up as individual tables with a decentralised extraction system. Depending on the situation, further fans and filter systems are required for this purpose
- Machining processes, such as those in the metalworking industry, generate general air pollution. Our workstations provide reliable relief for a wide range of applications, such as welding fumes, grinding dust, cutting dust, polishing, deburring, milling and turning, gluing. Depending on the application, different versions are available
- The unit is quiet except for the suction noise, which depends on the air extraction fan. The air supply fan is below 50 dB(A)
- Worktop made of 5 mm steel, table max. load 300 kg
- Connection cable with safety plug, approx. 5 m long
- Workplace light with adjustable angle, IO 65, 230 Volt
- Add on switch with socket, 230 Volt, side curtain rails in stainless steel
- Height adjustable feet (mech. + 70 mm)
- 2 x air inlet connection (DN 80), 1 x top air extraction connection (DN 200)
- Incl. earth and earthing connection
- Height adjustable feet (mech. + 70 mm)
- Sturdy tubular steel design in powder coated grey, RAL 7035, rear wall and deflector plates in anthracite, RAL 7016
- Delivered flat-packed, instructions included
- Delivery includes fresh air fan. This is supplied mounted on the workstation. The fan takes the air from the immediate vicinity of the workstation
€4,907.00
Excl. VAT
Free shipping
Delivery Time: On request
We work hard to give you good advice!
+44 1952 811 991
Mon-Thu: 8:30am – 5:00pm | Fri: 8:30am – 4:00pm
Full service for your projects
- Needs analysis and free on-site consultation
- Planning & project management
- Production
- Transport, assembly & commissioning
- Service & maintenance
Product information
| Technical data | Details |
|---|---|
| Version | Extraction table for welding and soldering |
| Material | Steel |
| Surface | powder coated |
| Colour | Grey |
| Total air supplied [m³/h] | 200 |
| Total air extraction [m³/h] | 1200 |
| Work area [W x D mm] | 1.000 x 900 |
| External dimensions W x D x H [mm] | 1200 x 1150 x 2400 |
| Model | Welding table S-1000 |
| Weight [kg] | 240 |
| Work surface height [mm] | 875 |
| Protection category ip | IP 65 |
| Nominal voltage [V] | 230 |
| Air extraction monitoring | no |
- Direct extraction of harmful substances from the workplace. The workstations have an integrated air supply and extraction device. With the air supply device, the air flow is directed diagonally from the lower and upper edges of the workstation into the work area, so that the user is constantly in a shielded air zone. The pollutants cannot break through this wedge of clean air and therefore remain in the rear part of the workstation
- Due to the aerodynamically shaped baffles and the semi-open design, the air containing pollutants is optimally captured and extracted, even at low air volume flows, by means of the Coanda effect achieved.
- Workstations can be connected to a central extraction unit or can be set up as individual tables with a decentralised extraction system. Depending on the situation, further fans and filter systems are required for this purpose
- Machining processes, such as those in the metalworking industry, generate general air pollution. Our workstations provide reliable relief for a wide range of applications, such as welding fumes, grinding dust, cutting dust, polishing, deburring, milling and turning, gluing. Depending on the application, different versions are available
- The unit is quiet except for the suction noise, which depends on the air extraction fan. The air supply fan is below 50 dB(A)
- Worktop made of 5 mm steel, table max. load 300 kg
- Connection cable with safety plug, approx. 5 m long
- Workplace light with adjustable angle, IO 65, 230 Volt
- Add on switch with socket, 230 Volt, side curtain rails in stainless steel
- Height adjustable feet (mech. + 70 mm)
- 2 x air inlet connection (DN 80), 1 x top air extraction connection (DN 200)
- Incl. earth and earthing connection
- Height adjustable feet (mech. + 70 mm)
- Sturdy tubular steel design in powder coated grey, RAL 7035, rear wall and deflector plates in anthracite, RAL 7016
- Delivered flat-packed, instructions included
- Delivery includes fresh air fan. This is supplied mounted on the workstation. The fan takes the air from the immediate vicinity of the workstation
€4,907.00
Excl. VAT
Free shipping
to Mainland U.K.
Personal consultation
by our hazmat experts
14-day right of return
in accordance with the terms and conditions
Maintenance and spare parts service
directly from the manufacturer
