Li-ion battery storage RFP 615.30
Item number: 274111W
- Area of application: best option when larger quantities or larger-sized lithium energy storage devices (batteries) need to be accommodated.
- Fire-rated store: tested and approved as a complete system with 90 minute fire protection (REI 90) from inside and outside. International designs meeting country-specific legislation (e.g. REI 120). Install directly next to the external wall of neighbouring buildings or as a fire-rated separate area, e.g. in a production hall.
- Dimensions: available in 4 sizes as a 1-bay / 2-bay store with variable bay heights.
- Storage levels: fitted with removable, hot-dip galvanised grids.
- Base: tested, single-piece spill pallet with easily removable hot-dip galvanised grids. An accessible concrete pad can be provided separately if access underneath for a hand operated electric stacker is required.
- External cladding: galvanised components with 2 layers of paint give long lasting protection. Fire protection panels (A class material, non-combustible) with high insulation properties.
- Door variants: with 2-wing EI₂ 90-C door on the long side of the room system. A door sequence controller ensures the doors close reliably. Door opening angle: 90° (minimum), 102° (door does not protrude beyond the side of the body), 115° (standard, from this point the effective clear dimension is now fully accessible), 128° (maximum).
- Structural analysis: to Eurocode 3 (EN 1993) measured for a characteristic wind load with a dynamic pressure of qw = 0.585 kN/m² and a characteristic ground snow load of sk = 2.5 kN/m²; adequately dimensioned according to DIN 4149, EN 1998-1:2004 for earthquake zone 3. Available with additional equipment for up to wind load zone 4, terrain category I (qw= 1.064 kN/m²) and for up to ground snow load sk = 5.86 kN/m².
Structural analysis
The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004. With additional equipment up to wind load zone 4 with terrain category I (qk,w = 1.064 kN/m²) or up to ground snow load sk = 5.86 kN/m².
Roof drainage
Roof drainage channels rain water to the frame running around the edge and drains it away on the short sides either to the left or the right.
- Needs analysis and free on-site consultation
- Planning & project management
- Production
- Transport, assembly & commissioning
- Service & maintenance
Product information
| Technical data | Details |
|---|---|
| Model | RFP 615.30 Li-Ion |
| Clear bay depth [mm] | 1.440 |
| Dimensions (without attachments) W x D x H [mm] | 6882 x 1784 x 3594 |
| Bay dimensions W x D x H [mm] | 2700 x 1.440 x 1350 |
| Door position | Long side |
| Door version | Hinged door |
| Door design | 2 wing doors |
| Door hinge | both sides |
| Load capacity [kg/m²] | 1250 |
| Containment volume [l] | 2800 |
| Number of storage levels | 2 |
| Weight [kg] | 5600 |
- Area of application: best option when larger quantities or larger-sized lithium energy storage devices (batteries) need to be accommodated.
- Fire-rated store: tested and approved as a complete system with 90 minute fire protection (REI 90) from inside and outside. International designs meeting country-specific legislation (e.g. REI 120). Install directly next to the external wall of neighbouring buildings or as a fire-rated separate area, e.g. in a production hall.
- Dimensions: available in 4 sizes as a 1-bay / 2-bay store with variable bay heights.
- Storage levels: fitted with removable, hot-dip galvanised grids.
- Base: tested, single-piece spill pallet with easily removable hot-dip galvanised grids. An accessible concrete pad can be provided separately if access underneath for a hand operated electric stacker is required.
- External cladding: galvanised components with 2 layers of paint give long lasting protection. Fire protection panels (A class material, non-combustible) with high insulation properties.
- Door variants: with 2-wing EI₂ 90-C door on the long side of the room system. A door sequence controller ensures the doors close reliably. Door opening angle: 90° (minimum), 102° (door does not protrude beyond the side of the body), 115° (standard, from this point the effective clear dimension is now fully accessible), 128° (maximum).
- Structural analysis: to Eurocode 3 (EN 1993) measured for a characteristic wind load with a dynamic pressure of qw = 0.585 kN/m² and a characteristic ground snow load of sk = 2.5 kN/m²; adequately dimensioned according to DIN 4149, EN 1998-1:2004 for earthquake zone 3. Available with additional equipment for up to wind load zone 4, terrain category I (qw= 1.064 kN/m²) and for up to ground snow load sk = 5.86 kN/m².
Structural analysis
The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004. With additional equipment up to wind load zone 4 with terrain category I (qk,w = 1.064 kN/m²) or up to ground snow load sk = 5.86 kN/m².
Roof drainage
Roof drainage channels rain water to the frame running around the edge and drains it away on the short sides either to the left or the right.
-
EFECTIS
-
IBS
Matching accessories and spare parts
to Mainland U.K.
by our hazmat experts
in accordance with the terms and conditions
directly from the manufacturer
