Floor marking paint TRAFFIC, white, 1 box with 12 x 500ml cans = 1 Pack
Item number: 257036W
- The Regulations for workshops ASR A1.3 state that traffic routes must be clearly recognisable and continuously marked on the floor. The colours used must be clearly visible.
- Floor marking paint - for professional, economical marking of indoor and outdoor areas. Sharp-edged marking on parking spaces and service roads.
- Green dot for easy disposal
- The floor should be cleaned and dust removed before application
- Only suitable for the New Perfekt Striper floor marking device
- High level of pigmentation
- Abrasion and weather resistant (abrasion resistance can vary depending on condition of the floor and weather conditions)
- Quick drying, Dry: approx. 20 minutes Hardened: approx. 4 hours Can be driven over: approx. 12 hours
- Not sensitive to changes in temperature
- With special nozzle for sharp-edged marking
- Free from CFCs, lead, cadmium and toluene
- Clean the floor before application
- White, similar to RAL 9016
- 12 cans, in a box, sufficient for approx. 600 m depending on width of line marked and floor conditions
Product information
| Technical data | Details |
|---|---|
| Installation location | Exterior |
| Colour | White |
| RAL Code | 9016 |
| Silicone-free | yes |
| Packaging unit | 12 Item(s) |
| Weight [kg] | 0,5 |
| Brand | Ampere |
- The Regulations for workshops ASR A1.3 state that traffic routes must be clearly recognisable and continuously marked on the floor. The colours used must be clearly visible.
- Floor marking paint - for professional, economical marking of indoor and outdoor areas. Sharp-edged marking on parking spaces and service roads.
- Green dot for easy disposal
- The floor should be cleaned and dust removed before application
- Only suitable for the New Perfekt Striper floor marking device
- High level of pigmentation
- Abrasion and weather resistant (abrasion resistance can vary depending on condition of the floor and weather conditions)
- Quick drying, Dry: approx. 20 minutes Hardened: approx. 4 hours Can be driven over: approx. 12 hours
- Not sensitive to changes in temperature
- With special nozzle for sharp-edged marking
- Free from CFCs, lead, cadmium and toluene
- Clean the floor before application
- White, similar to RAL 9016
- 12 cans, in a box, sufficient for approx. 600 m depending on width of line marked and floor conditions
Hazard and safety warnings
Signal word
Danger
Hazard pictogram


Hazard statements
H222: Extremely flammable aerosol.
H229: Pressurised container: May burst if heated.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
to Mainland U.K.
by our hazmat experts
in accordance with the terms and conditions
directly from the manufacturer