Sauter analogue shore durometer HBA 100-0, Shore A, measurement range 100 HA, readability 1.0 HA
Item number: 283638W
New
- Typical application: measurement of penetration depth (Shore)
- Recommended especially for internal comparison measurements. Standard calibrations, e.g. according to DIN 7619-1, are often not possible due to very narrow standard tolerances
- - Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials - Shore D plastics, synthetic resin, formica, epoxy, plexiglass etc. - Shore A0 foam, sponges etc.
- Sample material thickness: min. 4 mm
- Max mode: captures the peak value using a drag pointer
- Supplied in a plastic box
We work hard to give you good advice!
+44 1952 811 991
Mon-Thu: 8:30am – 5:00pm | Fri: 8:30am – 4:00pm
Your advantages
- Free shipping
- 30-day right of return
- Secure payment
- Maintenance and spare parts service
Product information
| Technical data | Details |
|---|---|
| Brand | SAUTER |
| External dimensions W x D x H [mm] | 115 x 60 x 25 |
| Weight [kg] | 0,5 |
| Operating temperature range max. [°C] | 40 |
- Typical application: measurement of penetration depth (Shore)
- Recommended especially for internal comparison measurements. Standard calibrations, e.g. according to DIN 7619-1, are often not possible due to very narrow standard tolerances
- - Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials - Shore D plastics, synthetic resin, formica, epoxy, plexiglass etc. - Shore A0 foam, sponges etc.
- Sample material thickness: min. 4 mm
- Max mode: captures the peak value using a drag pointer
- Supplied in a plastic box
Free shipping
to Mainland U.K.
Personal consultation
by our hazmat experts
14-day right of return
in accordance with the terms and conditions
Maintenance and spare parts service
directly from the manufacturer
