DENIOS AG Dehmer Strasse 58-66 32549 Bad Oeynhausen br>Tel.: +49 5731753-0 Email: firstname.lastname@example.org Internet: www.denios.ie
Air Extraction Tables
An extraction table for welding, soldering and gluing processes ensures effective personal and environmental protection. The extraction of the pollutants produced during welding and soldering work takes place through suction slots in different levels. The type of extraction and air flow is adapted to the special requirements for adhesive work.
Learn where the risk lurks in daily working life, which occupational groups are particularly at risk and what you should bear in mind when assessing the risks. Get our 3 proven prevention measures for better ergonomics and back health at the workplace.
Fume cupboards with ejector technology or sash? The technology comparison.
In many laboratories, classic fume cupboards with front sash are used. In practice, however, working behind the pane often means considerable compromises. The alternative is called ejector technology: we have compared both systems and show you which one is ahead.
Anyone who handles, uses or "only" stores hazardous substances cannot avoid it: the risk assessment. For 25 years it has been the central element in occupational health and safety. In our FAQs we have put together the answers to the most frequently asked questions on the subject of "Risk assessment for hazardous substances".
Explosion protection can quickly become an issue in all industries: Many hazardous substances that are handled on a daily basis harbour a corresponding hazard potential. Here you can find out what you need to know to get started with explosion protection.
Air Extraction Tables for Welding & Soldering Work
An air extraction table for welding, soldering and gluing processes ensures effective personal and environmental protection. The extraction of the pollutants produced during welding and soldering work takes place through intake slots in different levels. Supply air is injected diagonally from the upper and lower front edges along the entire width of the table so that no pollutants are inhaled. Of course, the tables can also be used without active suction function. Height-adjustable feet ensure comfortable working and relieve the employees.
Which extraction table do I need?
The requirements for an extraction table depend on the work processes and materials used. In our assortment you will find extraction tables for welding, soldering, grinding and gluing work. Soldering and welding tables filter the dusty air and blow diagonal incoming fresh air, so that the worker is always protected from pollutants. Curtains prevent the resulting pollutants from spreading in space, allowing them to be quickly and effectively extracted.
Extraction tables for gluing work take over the basic concept of the tables for welding and soldering work. However, the type of extraction and air flow is adapted to the special requirements for adhesive work. Underfloor suction tables suck in pollutants from below, preventing the rise of harmful emissions into the air. The table can be connected directly to an exhaust air connection.