Cooling Cabinets & Cooling Chambers
We attach great importance to energy efficiency in our cooling chambers and rooms. Homogeneous insulation properties over the entire outer shell and the use of structural components with low temperature transitions lead to a reduction in energy consumption of up to 50%. Temperature ranges from 0 ° C to 35 ° C are optimally covered and equipped with cooling or air conditioning units as required. Rack storage systems or walk-in room systems are manufactured with a positioning capacity of up to 16 IBC or 24 drums of 200 litres each.
Additional options can be selected:
In the refrigeration sector, DENIOS pays special attention to the specific needs of the user. Whether as a shelf storage system or a walk-in version - all our cooling and climate chambers are designed according to individual specifications. The air conditioning or cooling units, just like the controls, are designed according to the requirements and the overall system. The integrated spill pallet allows for the safe and compliant storage of hazardous substances of all water hazard classes. On request, fire protection and explosion protection can be realized in addition to an EnEV-compliant design.
Air-conditioning according to DIN EN 13779
The European standard EN 13779 classifies the air quality in rooms that are not inhabited but are intended for human residence. It classifies the quality of the room air, the supply and exhaust air and the outside air. The responsibility of the planner is increasingly emphasized by EN 13779. Specifically, this means that all persons involved in the construction of an air conditioning system must agree on a common basis at an early stage in order to avoid misunderstandings and costs. From the beginning of your planning, rely on DENIOS Project Managers to make sure your cooling and air conditioning system meets all the necessary requirements.
Regardless of whether air-conditioning or cooling to temperatures of up to 0 ° C: both the chambered storage systems and the walk-in systems can be designed for these tasks. The basic structure of our cooling and climate chambers is formed by a solid frame made of welded steel profiles and the integrated spill pallet with PPG 26 approval. Due to the all-round insulating material made of rigid polyurethane foam with a U-value of 0.24 W / m²K, a high-quality insulation is achieved. In the access area insulated doors are installed. Depending on the temperature range, air conditioning split units or cooling units are used. By a comprehensive equipment program, these systems are finally customized and optimized to meet your needs. Our solutions adapt flexibly to the needs of many industries: Chemical, pharmaceutical, automotive or food.
We're happy to help!
Do you need a cooling chamber or a refrigerator? Our engineers face every challenge and work out the best possible solution for your requirements.
Cooling and climate chambers from DENIOS are available as a walk-in system or as a rack storage system. To ensure reliable operation of the cooling systems, we use efficient cooling systems. Based on the potential risks posed by some substances, failure prevention is one of the key demands. Accordingly, the design of the correct air conditioning system based on a previous simulation takes place. In practice, combination devices are then often used, which are equipped with both a cooling and heating function.
The main features of our refrigerated chambers at a glance:
Rack storage systems and walk-in systems
Powerful cooling units (split units) with high control quality to ensure a precise temperature window
Maximum energy efficiency
Use of best insulation materials
Powerful systems for optimal air circulation
Reduction of energy consumption by up to 50% compared to conventional systems
Uniform temperature distribution
Integrated spill pallet
Homogeneous insulation properties over the entire outer shell
Use of high-quality climate doors with low temperature transitions
Explosion-proof version (optional)
Our walk-in cooling and air-conditioning systems are based on a robust steel frame, insulated on all sides and equipped with an integrated spill tray for the approved storage of all water hazardous materials. The control reliably monitors temperatures in the range of 0 ° C to 35 ° C. Refrigerated and climatic containers are available in two versions: as a basic version with standard insulation and as an energy-efficient high-efficiency version with EnEV certification. Upon request, these walk-in systems are supplied in fire-proof and explosion-proof design.
The rack storage systems of DENIOS refrigeration and air conditioning technology offer a wide variety of possibilities. Through modularity and comprehensive additional equipment, individual requirements are realized. The use of precise control technology with defined temperatures enables the storage of sensitive substances in the temperature range from 0 ° C to 35 ° C. The approved spill pallet allows for safe and legally compliant storage of water hazardous materials. Fire protection and explosion-proof designs are available on request.
We understand that our job is not just to put you an approved refrigeration chamber on your premises. We are proud of our holistic approach and therefore at your side from first contact until far beyond the commissioning of your individual solution. Our team of experts will gladly take over all measures - from the consultation and creation of the optimal concept for you to the turnkey handover and subsequent maintenance.
Not every measure can be put into words in a telephone conversation. That is why it is important for us to advise you on site. Our engineers are happy to come to you to carry out a professional site assessment and support you in finding a solution to perfectly meet your requirements. Make an appointment now!
|Need more information or advice? Call 02891 240 644 to speak to a DENIOS expert.|