Hazardous material storage WHS 7
Item number: 275077W
New
- Safe and legally compliant storage of substances hazardous to water (WGK 1-3) as well as flammable, toxic and oxidising media
- Water law, general building authority approval
- Roof and side walls made of cladding with non-combustible insulating panels (mineral fibre boards of building material class A in accordance with EN 13501-1), clad on both sides with coated steel cover sheeting
- Double-leaf insulated and lockable door (active leaf on the right) made of galvanised sheet metal cassettes with DIN 18252 / EN 1303 profile cylinder to ensure access restriction in accordance with §8 GefStoffV
- High quality 2 layer external paint
- Corrosivity class C3-M according to DIN EN 12944, part 1
- Integrated spill pallet made of hot-dip galvanised steel (S235JR) in accordance with DIN EN 10025
- Installation directly on the on-site foundation without additional substructure
- Spill pallet sealing tested in accordance with EN ISO 3452-1 with factory test certificate
- Convenient access thanks to low door threshold of 147 mm
- Storage surfaces with hot dip galvanised, removable grid shelves
- Prepared for the connection of potential equalisation on the customer side
Structural analysis
The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004.
Guidelines for storing flammable liquids (flash point ≤ 60 ° C, classes H226, H225 and H224)
- Observe distance from fire loads (mostly min. 10 m)
- Create equipotential bonding (earthing) (connection point provided); if required provide lightning protection
- Country-specific requirements for air exchange rate
- Specifications in accordance with HSG71
- Specifications in accordance with ATEX Directive 2014/34/EU
We work hard to give you good advice!
+44 1952 811 991
Mon-Thu: 8:30am – 5:00pm | Fri: 8:30am – 4:00pm
Full service for your projects
- Needs analysis and free on-site consultation
- Planning & project management
- Production
- Transport, assembly & commissioning
- Service & maintenance
Product information
| Technical data | Details |
|---|---|
| Dimensions (without attachments) W x D x H [mm] | 2804 x 2742 x 2780 |
| Internal dimensions W x D x H [mm] | 2500 x 2500 x 2510 |
| Model (external dimensions W X D) | WHS 7 (2804 x 2742 mm) |
| Storage area [m²] | 6.3 |
| Door version | Hinged door |
| Door design | 2 wing doors |
| Colour | Grey white |
| RAL Code | 9002 |
| Weight [kg] | 1247 |
| Load capacity [kg/m²] | 1000 |
| Installation location | Indoors and outdoors |
- Safe and legally compliant storage of substances hazardous to water (WGK 1-3) as well as flammable, toxic and oxidising media
- Water law, general building authority approval
- Roof and side walls made of cladding with non-combustible insulating panels (mineral fibre boards of building material class A in accordance with EN 13501-1), clad on both sides with coated steel cover sheeting
- Double-leaf insulated and lockable door (active leaf on the right) made of galvanised sheet metal cassettes with DIN 18252 / EN 1303 profile cylinder to ensure access restriction in accordance with §8 GefStoffV
- High quality 2 layer external paint
- Corrosivity class C3-M according to DIN EN 12944, part 1
- Integrated spill pallet made of hot-dip galvanised steel (S235JR) in accordance with DIN EN 10025
- Installation directly on the on-site foundation without additional substructure
- Spill pallet sealing tested in accordance with EN ISO 3452-1 with factory test certificate
- Convenient access thanks to low door threshold of 147 mm
- Storage surfaces with hot dip galvanised, removable grid shelves
- Prepared for the connection of potential equalisation on the customer side
Structural analysis
The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004.
Guidelines for storing flammable liquids (flash point ≤ 60 ° C, classes H226, H225 and H224)
- Observe distance from fire loads (mostly min. 10 m)
- Create equipotential bonding (earthing) (connection point provided); if required provide lightning protection
- Country-specific requirements for air exchange rate
- Specifications in accordance with HSG71
- Specifications in accordance with ATEX Directive 2014/34/EU
Matching accessories and spare parts
Free shipping
to Mainland U.K.
Personal consultation
by our hazmat experts
14-day right of return
in accordance with the terms and conditions
Maintenance and spare parts service
directly from the manufacturer
