DENIOS AG Dehmer Strasse 58-66 32549 Bad Oeynhausen br>Tel.: +49 5731753-0 Email: email@example.com Internet: www.denios.ie
Air technology work table for BECOM GmbH
BECOM GmbH in Hochstraß is one of the leading Austrian companies for electronic engineering & manufacturing services. Since 1985, the company has been successfully engaged in the order development and production of electronic and electromechanical assemblies and devices, from sample buildings to zero series to series production.
The challenge and task
During cleaning work on small parts, large amounts of flammable acetone vapours are released, from which employees must be protected. Since the solvent has a very low vapour pressure, the containers into which the small parts are inserted beforehand must also be constantly extracted.
After analysing the task, the DENIOS engineers proposed the use of an AT-Compact cleaning table in stainless steel design with a pollutant detection system. Since the acetone vapours are highly flammable, this work table was designed in ex-protection. Two tubs for inserting baths with suction connection and a drain area were integrated into the cleaning table.
Result and customer benefits
The solution developed by DENIOS provides a huge improvement for the employees who carry out this cleaning work. The result is a clean compact solution that saves space at once. The company is enthusiastic about the structured approach to the task and the flexible handling of DENIOS and intends to commission further air technology projects at DENIOS.
Discover matching products
Workbenches and safety cabinets with various air technologies and individual equipment options to suit your application.
Fume cupboards with ejector technology or sash? The technology comparison.
In many laboratories, classic fume cupboards with front sash are used. In practice, however, working behind the pane often means considerable compromises. The alternative is called ejector technology: we have compared both systems and show you which one is ahead.
Air-conditioning work table for BECOM GmbH from Austria
BECOM GmbH from Austria manufactures electromechanical assemblies. When cleaning small parts, inflammatory acetone vapors are produced which should protect the employees. A DENIOS cleaning table with pollutant detection ensured more safety.
Mixing station in the middle of the APO GmbH production halls
The APO GmbH from Germany deals with the coating of industrial mass small parts. To protect employees against harmful coatings, DENIOS constructed a transfer and mixing station, which at the same time ensured fire-protected storage.
In the handling of chemical raw materials in the powdery or dusty state, increased safety requirements apply to the design of workplaces to protect employees. Covestro AG chose DENIOS to implement the project.
Paint mixing room in fire-rated storage container for Siemens
If working with paints and varnishes in production areas, employees have to be protected accordingly. For Industrial Turbomachinery in Sweden, Siemens needed a safe room solution for the storage and mixing of paints. In order to optimize logistical processes, the spatial proximity to other buildings should be guaranteed.
DENIOS developed a fire protection storage system for the chemical company Chemion that can be set up directly in production. The technical room system is not only state of the art, but also allows simultaneous work on the containers and loading from the side.