When storing hazardous materials and flammable liquids a spill pallet must be used that has a sufficient volume according to current regulations to catch and leaks or spills. Our shelf trays allow you to upgrade existing shelf systems to ensure legal compliance and the safe storage of hazardous materials.
Companies in the engineering, automotive and pharmaceutical industries may have several reasons for choosing to retrofit their facility. In many cases, the additional space can help to improve performance and increase production. Additionally, operations managers often find that retrofitting is cheaper than replacing the existing shelving and far less time-consuming.
DENIOS Ireland can provide shelving for warehouses, stockrooms and shop floors, extending the life of your current equipment and future-proofing your storage provision. With the right planning, you can retrofit our units very quickly during the evening or over a weekend with minimal impact on your overall productivity.
Our sump pallets, racking, spill trays and accessories enable your site to maintain work safety when keeping hazardous materials. They are designed to meet all PPG 26 regulations and will help to ensure your operation stays compliant when it comes to the difficult task of storing flammable (or otherwise dangerous) materials and liquids. Choose from steel or polythene units depending on your requirements, along with grids to offer resistance against corrosive chemicals.
When you need shelving that can safely hold aggressive chemicals, but your current pallet racking is not appropriate, an add-on like our Pallet Racking Sump KRW 27.11 Polyethylene Steel Grid For 2700 mm Shelf Width, 205 Litre Capacity is a great solution. Produced in eco-friendly polyethylene, it converts normal shelves into safe and compliant hazmat stores. The spill pallet has a depth of 900 mm and the rack is placed over crossed beams for extra security. The grid is galvanised for extra strength and provides a high level of resistance to alkalis or acids. If any of your bottles do happen to leak, any spill will be adequately contained within the sump tray and will not present an environmental hazard by dripping onto the floor.
Alternatively, if your warehouse has standalone sump pallets which are being used to store IBCs or drums, our Sump pallet classic-line is ideal. It includes a base spill pallet which sits beneath your setup and collects any spills before they spread. These are constructed from sturdy welded steel and tested to comply with EN ISO 3452-1, for which a certificate is provided. We’ve included a clearance of 100 mm between the floor and the base, so you can move the unit with a forklift when you need it transported elsewhere. Use our IBC Sump Liner in Polyethylene, which is available as an accessory, if you need acid-resistant protection.
Designed to hold small-volume containers and large-volume drums and intermediate bulk carriers (depending on the model), spill trays and drip trays from DENIOS provide a safe, contained environment for hazardous materials in the event of a leak or spill. When installed on the bottom of a pallet rack shelf as part of a standardised storage concept, this enhances the visibility of the hazardous materials being stored and ena-bles leaks to be detected by personnel at an earlier stage.
Shelf trays and rack trays are available in different volumes, materials and configura-tions to meet every operational requirement and comply with industrial environmental regulations. All spill tray models are designed to be highly resistant to corrosion, acids and alkalis, and are easy to clean and install. Some variants are fitted with a robust grid, thereby allowing the container to sit on the shelf tray rather than inside it. Ease of access is guaranteed, as is legal compliance regarding the storage of hazardous materials.
Containment shelving comes in a wide range of sizes, volumes and configurations. To gain a better idea of which type of spill tray is required for the job at hand, they can be roughly divided into ‘large’ and ‘small’ variants.
Large-scale containment shelving consists of space-saving shelf trays to be fitted in or under an existing industrial pallet rack. Designed to catch spills from drums or interme-diate bulk carriers, they have a generous spill pallet depth, are highly corrosion-resistant, and are easy to install. Available in galvanised steel and plastic, DENIOS stocks models intended specifically for the storage of flammable liquids and that have been subjected to penetrant testing in accordance with EN 3452-1
Consisting of plastic spill trays, drip trays and wheeled variants, small-scale contain-ment shelving is designed to ensure long-term corrosion protection when storing ag-gressive liquids. Able to accommodate an array of small containers, these chemical spill trays have dimensions to suit standard Euro and chemical pallets and are based on a sturdy design with effective shock and impact resistance. Some variants feature a re-movable plastic grid for easy cleaning, as well as a leak indicator to give workers a timely warning in case of escaping contents. There are also models rated for the stor-age of acids, alkalis and materials moistened with hazardous substances.
Containment shelving is a critical element of a well-functioning storage location for haz-ardous substances, as it prevents the spread of leaks and spills and enables any es-caped material to be either returned to the container or disposed of safely. Chemical spill trays and racks for trays can be installed with ease in an existing pallet rack sys-tem to boost workplace safety, minimise damage to equipment and ensure full compli-ance with environmental regulations. Browse the full DENIOS selection of containment shelving and plastic spill trays to find the ideal solution for an optimised workspace.
Give us a call or fill out the form and we will get back to you as soon as possible.
Calls are handled by our UK team. All sales are processed via our German parent company so are VAT* / tariff free where applicable. *Must be fully IE VAT registered