Dehmer Strasse 58-66
32549 Bad Oeynhausen
br>Tel.: +49 5731753-0

Individual filling of chemicals

Chemion Logistik GmbH can look back on more than 150 years of experience in the field of chemical and chemical-related logistics. Initially as the Central Logistics Division of the Bayer Group, later as a fully owned subsidiary of CURRENTA GmbH & Co. OHG. Today, Chemion has around 1,000 employees at the three CHEMPARK sites in Leverkusen, Dormagen and Krefeld-Uerdingen as well as the two external warehouses in Duisburg.

Challenge and task

One of Chemion's fields of activity is the individual filling of chemicals into containers of various sizes:

  • Individual delivery volumes in large and small containers.

  • Special systems for filling and transferring drums and IBCs

  • Sample filling with labelling and dispatch within 24 hours

For the relocation of the "Sample Service Centre" from Krefeld to Dormagen, an existing warehouse building had to be adapted to the needs of filling and refilling product samples. Chemion was looking for a competent partner for this and chose DENIOS.

The solution

Together, Chemion and DENIOS developed a concept for filling activities in a technical room system. For this purpose, an F90 fire protection warehouse was equipped with two integrated work tables where chemicals are transferred from drums and IBCs into smaller containers. The transfer storage system is an F90 shelf storage system of the DENIOS type series FBM base.

The interior was fitted with electrically conductive PE inliners and equipped for Ex zone 1 (design min. II 2G EEx e IIB T3). Outside the technical room system, no Ex zone was required. For loading, a double-leaf swing door element (T90-2, DIN right) with automatic door closing and hold-open system was installed on each of the two short fire protection storage sides. At the front of the hazardous materials warehouse, there is a double-leaf door element for entry and unloading, also with an automatic door closing and hold-open system and F90 glazing in the active leaf. In addition, the rear also contains a door element for entering the warehouse.

A technical ventilation system with exhaust air monitoring ensures a 5-fold air exchange in the fire protection warehouse. The exhaust air is cleaned by a customer-side scrubber. Two movement switches ensure safety-relevant monitoring of the interior for personnel activity. The floor of the fire protection storage area is covered with grids (mesh size 22 x 11 mm) that can be accessed by forklift trucks.

Behind the loading door are two dosing stations, designed in width and length for IBCs. However, an adapter attachment also allows transfer from horizontal 200-litre drums. Also inside the warehouse are two filling tables with height-adjustable feet (30 mm). They contain three stainless steel basins in liquid-tight, welded tub design and centrally arranged drains with stopcocks. Ejector nozzles are integrated into the front edge of the basins to specifically remove airborne particles from the employee's breathing area. The suction channel is located in the rear area of the basins. In addition, an ATEX extraction arm with a control switch (on-off) in Ex design is installed in the interior of the fire protection warehouse. The arm length is 1.5 m. The arm is connected via an exhaust air line to a fan that is mounted on the roof of the fire protection warehouse.

Result and customer benefit

Chemion received an important component for the legally compliant and officially approved solution, which is perfectly tailored to Chemion's needs. Thanks to the interaction between the DENIOS business areas of hazardous materials storage and air technology, it was possible to develop an overarching solution that also meets all the requirements for the sensitive areas of pollutant detection and fire protection.

Discover matching products

Fire protection warehouse

Fire protection bearings from DENIOS offer reliable, double-sided F 90 (REI 90) fire protection. Benefit from tested safety for your fire protection bearing!

See the range

Work tables

Workbenches and safety cabinets with various air technologies and individual equipment options to suit your application.

See the range

Take advantage of our expert advice!

Customised advice, service and product diversity are our strengths.

Our customer advisors are on site for you!

Free expert advice +44 1952 811 991

Related content


Ventilation of hazardous material cabinets

And why you should have recirculation filters in mind as an alternative to exhaust air systems.

Read more

Effectiveness of technical safety fume cupboards

Technical extraction systems capture dusts and vapours at the source of danger before they are dispersed through the air in the room and enter the breathing zone. We explain the legal basis for the detection of pollutants at the workplace, the so-called STOP principle and the advantages and disadvantages of different extraction systems.

Read more

Working safely with hazardous materials

Containment systems for professional environmental and personal protection.

Read more

Fume cupboards with ejector technology or sash? The technology comparison.

In many laboratories, classic fume cupboards with front sash are used. In practice, however, working behind the pane often means considerable compromises. The alternative is called ejector technology: we have compared both systems and show you which one is ahead.

Read more
Case study

Storage of solvents

The Schunk Group specialises in the manufacture of carbon and graphite products. The employees are frequently in contact with cleaning agents containing solvents. DENIOS created a large-scale in-house solution that made storing the liquids just as possible as working directly on them.

Read more
Case study

Air-conditioning work table for BECOM GmbH from Austria

BECOM GmbH from Austria manufactures electromechanical assemblies. When cleaning small parts, inflammatory acetone vapors are produced which should protect the employees. A DENIOS cleaning table with pollutant detection ensured more safety.

Read more
Load more items 6 of 13 articles were loaded
Log in
Your basketAdded to basket
Go to basket
We would be pleased to provide you with advice!

Give us a call or fill out the form and we will get back to you as soon as possible.

Mon - Thu: 08:30 - 17:00 | Fri: 08:30 - 16:00

Calls are handled by our UK team. All sales are processed via our German parent company so are VAT* / tariff free where applicable. *Must be fully IE VAT registered