Dehmer Strasse 58-66
32549 Bad Oeynhausen
br>Tel.: +49 5731753-0

Dangers when handling lithium-ion batteries

Due to their design, lithium batteries harbour an increased risk potential - the associated fire risks can affect any commercial enterprise. In this article, we take an in-depth look at the potential dangers of handling lithium energy storage devices.

Technology that's a fire hazard?

Lithium-ion batteries are a comparatively recent technology. But since their market launch in the early 1990s, they have left a lasting mark on the energy storage market and gradually displaced old technologies. Today, it is impossible to imagine our everyday life without lithium batteries - and for good reason: they can be particularly small and at the same time very efficient and are therefore of interest for a wide range of applications. Not only smartphones and tablets draw their energy from lithium batteries, they also play an important role in the field of electromobility. Lithium energy storage devices are an ideal choice here due to their high energy density with low weight and fast charging.

The other side of the coin: dangerous incidents involving lithium energy storage devices are repeatedly reported. In 2017, a fire in a parking garage made the headlines, caused by the battery of an e-bike. In 2018 a man from Hamburg died when a battery charger exploded. There is no question: explosions and fires involving lithium-ion batteries can have devastating consequences, causing expensive consequential damage or, in the worst case, costing human lives. It's not just members of the public, but also companies who are faced with the urgent problem of ensuring the safest possible handling and storage. The fact remains that §5 ArbSchG obliges employers to identify and assess hazards and to implement suitable protective measures.

High safety standards for series products

By today's manufacturing standards, lithium batteries are considered comparatively safe. As a rule, various safety tests are carried out by the manufacturer before (series) products are put on the market. For example, the transport of lithium energy storage devices is only permitted if a test certificate in accordance with UN 38.3 is available. To obtain this certificate, a number of series of tests must be successfully completed in which the batteries are tested under various transport conditions. This includes:

  • Altitude simulation
  • Thermal test
  • Vibration
  • Blow
  • Outer short
  • Impact / crush test
  • Overload
  • Forced discharge

As the batteries can be stressed beyond their load limits during such tests, they take place under special safety conditions. Many of our customers additionally carry out their own test series, e.g. to verify the safety of the batteries in connection with their products. They use DENIOS technical room systems as a safe test environment.

To increase the safety of lithium-ion batteries, manufacturers can already equip them with various safety devices at cell level. If a flammable electrolyte is used within the cell, for example, flame retardant additives can be added to provide better protection. Storage of the battery in an impact-resistant, corrosion-proof housing with fire-retardant foam can also be an effective measure.

"Thermal Runaway"

Nevertheless, special care should be taken when handling lithium-ion batteries - because dangerous fires occur time and again. If anything happens, the consequences are often disastrous. The risk lies in the construction of the battery itself. Where materials with a high energy density come into contact with highly flammable electrolyte, these create an extremely dangerous mix. The situation becomes especially dangerous when a lithium battery releases its stored energy in an uncontrolled manner. As soon as the heat created exceeds the melting point of the separator, an uncontrollable chain reaction is started, the dreaded "thermal runaway".

The high levels of heat energy then vaporise the electrolyte fluid, creating additional heat and combustible gases. If the pressure rises above a certain point, the flammable gases are released and form an ignitable mixture with the air - flames develop on the outside of the battery. Thermal runaway in just one cell is enough to heat up the neighbouring cells in a battery block so that a devastating chain reaction is created. Once set in motion, it only takes a few minutes until the battery will burn and explode. These lithium-ion battery fires are difficult to control and the fire spreads quickly. The fire brigade can often only protect neighbouring areas.

Common causes of fire

In normal operation, the use of lithium batteries is considered safe. But according to VDE, this only applies as long as everyone handles them properly. For example, if lithium-ion batteries are handled or stored incorrectly, they can pose a significant safety risk. In addition, factory defects cannot always be ruled out.

These 3 things are particularly dangerous:

Electrical overload

Mechanical damage

Thermal overload

Electrical overload

A typical risk in handling lithium batteries is actually quite common: namely charging and discharging. An electrical overload can occur here for a number of reasons, e.g. due to the use of an incorrect charger. But a fire can also occur as a result of a deep discharge. If lithium-ion batteries are not used for a long time, they can become completely discharged. Incorrect storage conditions - for example, storage outside the manufacturer's recommended storage temperature - can promote this effect. This leads to the decomposition of the electrolyte liquid and consequently to the formation of highly flammable gases. If an attempt is then made to recharge the deeply discharged lithium-ion cells, the energy supplied can no longer be converted correctly due to the lack of electrolyte fluid. A short circuit or fire may occur.

Mechanical damage

When handling lithium-ion batteries, there is always a certain risk of damaging them. Collisions with company vehicles, a fall onto hard ground or crushing due to incorrect storage conditions are just a few examples of mechanical damage. If cells are deformed as a result, this can lead to internal short circuits and a fire in the battery. Also, contamination during the production of the cells themselves cannot be 100% ruled out. In rare cases, particles that enter the cell during production can damage it from the inside over time. Internal short circuits can then also occur.

Thermal overload

External heat or energy sources can heat up lithium batteries and thus lead to a fire due to thermal overload. Typical sources of danger are, for example, open fire, hot machine parts or storage in direct sunlight.

In general the following applies:

The potential risk associated with lithium-ion batteries increases the more energy the batteries used/stored can store and the larger the quantity stored. This, as well as your individual operational and structural conditions, processes and organisational conditions should always be assessed on a case-by-case basis as part of a risk assessment.

We are happy to advise you!

Whether on the phone, via e-mail or in person at your premises - we are happy to help and advise you. Get in touch with us.

Free expert advice 01952 811 991

Related Content

Case Study

Battery test laboratory at Phoenix testlab

DENIOS produced a system that could simulate five different test conditions for testing lithium-ion batteries. The fire protection system provided protection for the employees and effectively designed entire process chains.

Read more
Case Study

Test bench for stationary energy storage

Voltavision GmbH is a research and development service provider that operates test facilities. The company needed a separate fire section. In cooperation with DENIOS, an F90 climate container was built that could prevent all possible risks as a preventative measure.

Read more
Case Study

Showroom in the area of renewable energies for Hoppecke

HOPPECKE is a company that manufactures energy storage systems and industrial batteries. For exhibition purposes, the company needed a fire and explosion-proof container in which modern battery storage technologies could be stored and demonstrated.

Read more
Case Study

Storage of lithium-ion batteries at the motorbike manufacturer KTM

KTM Sportmotorcycle AG from Austria manufactures motorcycles. For the storage of lithium-ion batteries, a hazardous materials store was required. Together with the battery manufacturer, DENIOS constructed a technical and security room that complied with all legal conditions.

Read more

Lithium batteries: measures to prevent damage

Storing lithium-ion batteries often presents companies with a dilemma. So far there are no legal regulations that could be used as a guide. It is therefore up to the companies themselves to define and implement suitable measures. Our infographic shows you suitable safety measures for different battery performance classes and 5 safety rules that you should absolutely observe.

Read more

Fire fighting for lithium battery fires

Lithium-ion battery fires are very difficult to fight. What do you have to do if a fire breaks out? In this article you will learn how you can extinguish the fire and the risks to be considered.

Read more

The specialist information on this page has been compiled carefully and to the best of our knowledge and belief. Nevertheless, DENIOS AG cannot assume any warranty or liability of any kind, whether in contract, tort or otherwise, for the topicality, completeness and correctness either towards the reader or towards third parties. The use of the information and content for your own or third party purposes is therefore at your own risk. In any case, please observe the locally and currently applicable legislation.

Log in
Your basketAdded to basket
Go to basket
*Required field

If you want to request more than one product, please use the shopping list function. Please also note our Data protection declaration .

This website is protected by reCAPTCHA and Google's privacy policy and terms of use apply.