DENIOS AG
Dehmer Strasse 58-66
32549 Bad Oeynhausen
br>Tel.: +49 5731753-0
Email: info@denios.ie
Internet: www.denios.ie

Temperature controlled storage in water-protection area

UPPC AG in Baltringen was founded in 1986 as a family company and incorporated in 2008 as UPPC GmbH in Dow in Germany. The company has grown to be a worldwide specialist in the manufacture and production of epoxy resins and adhesives as well as glycidyl ether. The well known epoxy resin POLYPOX is used by many customers in this industry to manufacture user-friendly high quality products. UPPC GmbH has registered all substances (including imported substances) through the REACH European chemical regulations. These regulations provide for a high level of protection for both employees and the environment.

The challenge and task

As the installation site is in a water protection area, the heat chambers had to be fitted with spill pallets with a containment volume of 12000 litres per chamber, so that the complete volume of fluid stored could be retained in an emergency situation. The required temperature had to be reached using hot water heating.

The solution

Together, UPPC and Denios designed two heat chambers of Type WK 814-2, each with two storage levels, for 12 x 1000 litre IBCs per heat chamber. Temperature control was performed by a hot water heating system. Both heat chambers were fitted with a spill pallet, which had a volume of 12000 litres to ensure the entire volume of the hazardous substances stored could be contained. The equipment could therefore be set up in a water protection area.

Result and customer benefits

With the involvement of the authorities, insurance companies and the fire brigade, an economical and legally-compliant solution could be created which offered maximum safety. The DENIOS heat chamber offers a first class combination of efficiency and protection for employees and the environment.

Discover matching products

Heating chambers

Heating chambers from DENIOS: precise and safe thermal processing!

See the range

Thermotechnology equipment

Equip your heating chamber according to your needs! We will be happy to advise you.

See the range

Take advantage of our expert advice!

Customised advice, service and product diversity are our strengths.

Our customer advisors are on site for you!

Free expert advice 01952 811 991

Related articles

Article

Thermotechnology - A concise guide to climate controlled storage

How can thermotechnology help your business? There are two key reasons to have climate controlled storage: safety and efficiency. Safety: hazardous and volatile substances often need to be stored at specific and consistent temperatures to keep them safe. Efficiency: storing and maintaining substances at the best temperatures for immediate use your manufacturing process improves efficiency.

Find out more about how harnessing thermotechnology-based solutions can work to improve your business operations. Understand which solution best fits your your needs: heated containers, hot boxes, air-conditioned storage, heated jackets or heating bases for drums and IBCs.

Read more
Case study

Heating chambers with high capacities and short warm-up times

A specialty chemicals manufacturer from Wesel needed six heat chambers to store different substances with different properties safely. Explosion-proof roller doors ensured safety and space gain.

Read more
Case study

Temperature controlled storage in water-protection area

UPPC GmbH produces epoxy resins and adhesives. Since the company is located in a water protection area, the thermal chambers had to have collecting basins so that chemicals could not get into the environment in an emergency. DENIOS storage solutions offered maximum protection for employees and the environment.

Read more
Case study

Heated chambers for the desert

The airline company Qatar Airways has emergency slips like any other airline. These are exposed to great temperature fluctuations. Therefore, DENIOS climatic chambers were tested for possible deviations of the material. The DENIOS product thus contributed actively to the flight safety of the desert state.

Read more
Case study

Fully automated heating chamber

Digital process support through networking to a control system high priority for this DENIOS customer. They were also looking for an effective solution that included a complete automation of thermal stock preparation. In response DENIOS has developed a fully automatic heating chamber. This is designed as a continuous tunnel with several levels and individually heatable heating aisles.

Read more
Case study

Heating up to 18,000 litres on just 15 square metres

An essential part of the manufacturing process of mold release agents and release agents is the temperature-controlled liquefaction of raw materials for further processing. For this purpose, our customer needed a tailor-made heat chamber. The special challenge: the production area at the customer's site was almost completely exhausted and an extension was not possible. A heat chamber with a high capacity had therefore to be realized on the smallest of footprints.

Read more
Load more items 6 of 8 articles were loaded
Menu
Log in
Your basketAdded to basket
Go to basket
We would be pleased to provide you with advice!

Give us a call or fill out the form and we will get back to you as soon as possible.

Mon - Thu: 08:30 - 17:00 | Fri: 08:30 - 16:00
i

Calls are handled by our UK team. All sales are processed via our German parent company so are VAT* / tariff free where applicable. *Must be fully IE VAT registered