DENIOS AG Dehmer Strasse 58-66 32549 Bad Oeynhausen br>Tel.: +49 5731753-0 Email: firstname.lastname@example.org Internet: www.denios.ie
bio.x - Solvent-free parts cleaning on a biological basis.
Solvent-based cold cleaners are often used for cleaning workpieces, machine parts or small parts. However, these pose considerable risks to humans and nature. Through evaporation or splashing, they enter the environment and are absorbed through the skin or respiratory tract. In addition, there is a risk of fire and explosion.
With the bio.x cleaning system developed by DENIOS, you can do completely without harmful solvents - with the best cleaning results. bio.x includes bio.x parts cleaner and bio.x cleaning agents for solvent-free parts cleaning. They convince with a gentle and at the same time highly effective cleaning performance.
bio.x Cleaners. The solvent-free cleaning agents on a biological basis.
Thanks to powerful surfactants and a high concentration of resistant natural microorganisms, the solvent-free bio.x cleaners achieve high grease dissolving power, reliability and long service life when cleaning small parts. The gentle bio.x cleaners are environmentally friendly, biodegradable, dermatologically tested and very skin-friendly.
Oils and fats are biodegraded. bio.x is absolutely free of harmful solvents, EDTA and toxins.
No risks to the health of the user. No risk of explosion or fire. Very good skin tolerance.
bio.x is universally applicable with highly effective cleaning power due to selected and proven surfactants.
Continuous self-cleaning enables long service lives with consistently high effectiveness.
bio.x for user protection and a better solvent balance
bio.x completely eliminates the use of harmful solvents and thus helps you to protect the health of your employees and improve your solvent balance. In addition, you fulfill the substitution requirement according to §7 GefStoffV.
"Employers must ensure that health, fire and explosion hazards are avoided or at least kept as low as possible when selecting the cleaning process, cleaning agents, cleaning fluids and cleaning equipment as part of the risk assessment. In particular, the substitution test in accordance with the GefStoffV must be taken into account. The result of the substitution must be documented."
(DGUV Information 209-088)
bio.x Cleaning agents
bio.x cleaners are specially developed universal solvent-free cleaning agents on a biological basis. The bio.x cleaners for parts washers are perfectly matched to the bio.x devices and the workpieces to be cleaned. The biological bio.x cleaners are suitable for
all common metals (including aluminum and brass)
painted and galvanized surfaces.
They remove oils, light greases, cooling lubricants, corrosion protection agents, particle dirt and many other contaminants. Application examples are the cleaning of components during maintenance of production plants, the cleaning of equipment and tools in repair and maintenance or also the cleaning of dimensioned parts in production.
bio.x Cleaner (ready for use)
The bio.x cleaner was developed for all typical work in industry, workshop and maintenance. The working temperature is 41 °C, it is compatible with oil separators and has a long service life. The remaining cleaner film temporarily protects against flash rust formation and can be rinsed off without residue.
The bio.x cleaner developed for the bio.x parts washers as a concentrate is an effective degreaser and is ideal for individual dosing. The recommended mixing ratio is 1:4 and the working temperature is 41 °C. The 5-liter canisters can be stored to save space.
The highly effective formula of bio.x Cleaner Ultra is even stronger and removes the strongest contaminants such as heavy oils, greases or anti-corrosion waxes in the shortest possible time. It has high dirt dissolving power and optimized grease dissolving capacity, even with gummy grease.
The Power Up cleaning booster improves the cleaning effect of the bio.x cleaner. To clean particularly heavily soiled components, it is added to the cleaning bath as required. It is suitable for all bio.x cleaners. The 5-liter canister is sufficient for one bath filling.
bio.x Protect, the mildly alkaline corrosion inhibitor, was developed for gray cast iron, iron and steel that are susceptible to corrosion. It can be added to the cleaning bath when higher temporary corrosion protection is required. 1 liter is sufficient for 100 liters of bio.x cleaning agent.
Discover the new optimized bio.x parts cleaners for solvent-free parts cleaning - quality and design, Made in Germany! The user-friendly parts washers heat the cleaning bath to a pleasant 41°C and ensure efficient parts cleaning by brushing, spraying or soaking.
We have optimized the bio.x parts cleaners for you:
The new compact technology unit makes the bio.x parts cleaners particularly low-maintenance - repairs are easier than ever!
The optimized control system and innovative sediment monitoring ensure reliability and the best cleaning results.
Even higher energy efficiency thanks to improved thermal insulation, evaporation protection and integrated energy-saving mode when not in use.
The New Size
Parts Cleaner bio.x A25
The new bio.x A25 bench-top unit is the smallest and most mobile unit. Thanks to its compact dimensions and low weight, it can be used flexibly wherever space is at a premium. The bio.x A25 is suitable for cleaning small parts, tools and gears. It works extremely economically and offers all important basic functions for manual brush cleaning.
The new compact bio.x B60 is ideal for tight spaces and offers maximum mobility. Thanks to integrated castors that can be easily mounted, it is easy to move and use in different locations. The plug-in lid provides even more flexibility. The bio.x B60 offers an optimized bath capacity of 60 liters and is particularly economical.
The classic in a new design: The bio.x C100 impresses with high stability and a load capacity of up to 250 kg. The optimized spacious work surface enables barrier-free and comfortable working. The plug-in lid can be easily removed, for example, if parts hanging from the crane need to be cleaned. It can be moved underneath with a lift truck.
Thanks to the enlarged work surface, the bio.x C100 XL is optimal for very large and bulky parts. Two people can work on the unit at the same time. The barrier-free work surface guarantees maximum comfort and good accessibility from all sides. The bio.x C100 XL has a particularly stable design and can be driven under with a lift truck.